Hangzhou Fuyang Jincanda Water Treatment Equipment Co., Ltd

High quality product, professional service, being the core supplier in laser industry!

Commercial Industrial Water Softener Soft Water System For Boiler

Detailed product: Softened water equipment water requirements Residual chlorine<0.1ppm Turbidity<2 Fe<0.3ppm Mn<0.3ppm Total salt content<500ppm Softened water equipment technical indicators Working pressure:0.15-0.6MPa Operating temperature:5-50℃ power supply:220V、50Hz power:≤10W...

Send Inquiry
Product Details

Detailed product:

Softened water equipment water requirements

Residual chlorine<0.1ppm

Turbidity<2

Fe<0.3ppm

Mn<0.3ppm

Total salt content<500ppm

Softened water equipment technical indicators

Working pressure:0.15-0.6MPa

Operating temperature:5-50℃

power supply:220V、50Hz

power:≤10W

Water production:1-110m3/h

The valve body material:High-strength plastic or lead-free copper

Tank material: Wrapped glass or carbon steel within the corrosion and stainless steel            

Control mode: time type and flow type or no power hydraulic drive type

Product Water hardness:≤0.03mmol/L(Raw water hardness≤8mmol/L hour)

Regeneration mode:downstream or countercurrent

Interface form:Pipe thread / ABS flange

Resin:Imported

Recycled water consumption:≤2%×Water production

Salt consumption:≤100g/mol

Installation conditions: do not need a separate equipment foundation, the general level of cement can be ground, in the 1 meters around the equipment should be located within the drainage ditch or drainage

Softened water equipment works

When the raw water containing the hardness ions passes through the exchanger resin layer, the calcium and magnesium ions in the water are replaced with the sodium ions in the resin, the resin adsorbs calcium and magnesium ions and the sodium ions enter the water, so that the water flowing out of the exchanger is Remove the hardness of the softened water ions.As the exchange process continues, the Na + in the resin is replaced by saturation, and the exchange function is lost. At this time, the resin must be regenerated using the industrial NaCl (no carbon) solution, and the Ca2 + and Mg2 + adsorbed by the resin are replaced, Resin re-adsorbed sodium ions, to restore the softening exchange capacity.

Softened water equipment characteristics

1、High degree of automation, stable operating conditions.

2、Advanced program control device, running accurate and reliable, alternative manual operation, the full realization of all aspects of water treatment of automatic conversion.

3、High efficiency, low energy consumption, operating cost economy. As the overall design of the softener, so that the exchange capacity of the resin can be fully developed, the device uses jet-type salt, alternative salt pump, reducing energy consumption.

4、Flow-type softened water equipment is compact, small footprint, saving infrastructure investment, installation, commissioning, easy to use, stable operation of parts.

If the commercial industrial water softener soft water system for boiler caters to your requirement, welcome to contact our factory for more details. As one of the leading and experienced manufacturers and suppliers in China, we are always at your service.

Related Products
Inquiry