The commonly used automatic cleaning methods of filter cartridge include high-pressure gas pulse back blowing and mechanical vibration. Pulse blowback is to use the parameters set by the controller to give a signal to the solenoid valve, instantly open and close the solenoid valve diaphragm, so that the high-pressure gas into the nozzle, using the rapid expansion of the gas shake off the dust on the surface of the filter cylinder, general gas pressure we set for about 6 kg force. Mechanical vibration dust removal is often used in small single-machine filter cartridge dust remover, it is the use of dust remover plate eccentric device generated by the shaking power to dust, this action needs to stop after the operation
- Filter For
- Working Principle
- 3 Ways Of Filtration, Deep Filtrati...
- Filtration Speed
- Performance Features
- Performance Classification
- Design Wind Speed
- Comparison Of Cartridge Type And Ba...
- The Concept Of Water Filtration
- Water Filtration Principle
- Principle Of Water Filtration Treat...