Industrial / Commercial Activated Carbon Water Filtration System
Product Details: Activated carbon In the water quality pretreatment system, the activated carbon filter can absorb the residual chlorine which can not be removed in the pre-filtration to prevent the degradation of the reverse osmosis membrane after the oxidation, but also adsorption from the...
Activated carbon In the water quality pretreatment system, the activated carbon filter can absorb the residual chlorine which can not be removed in the pre-filtration to prevent the degradation of the reverse osmosis membrane after the oxidation, but also adsorption from the former leakage of small molecules such as organic pollutants, On the water odor, colloid and pigment, heavy metal ions have a more obvious adsorption and removal, but also has the role of reducing COD. Can further reduce the RO water SDI value, to ensure SDI <5 TOC <2.Oppm.
Activated carbon adsorption principle is: in the surface of its particles to form a layer of balanced surface concentration, and then add organic matter impurities into the activated carbon particles, the use of the initial adsorption effect is high. But the time is long, the adsorption capacity of activated carbon will be weakened to varying degrees, the adsorption effect also will decline. If the aquarium in the watery turbidity, high levels of organic matter in the water, activated carbon will soon lose the filter function. Therefore, the activated carbon should be cleaned or replaced regularly.
The size of the activated carbon particles also has an effect on the adsorption capacity. In general, the smaller the activated carbon particles, the larger the filtration area. Therefore, the total area of powdered activated carbon is the largest, the adsorption effect is the best, but the powdered activated carbon is easy to flow into the aquarium with water, difficult to control, rarely used. Granular activated carbon due to particle formation is not easy to flow, organic matter and other impurities in the activated carbon filter layer is not easy to block, its adsorption capacity, easy to carry replacement.
The adsorption capacity of activated carbon is proportional to the time of contact with water, the longer the contact time, the better the water quality after filtration. Note: Filtered water should flow slowly out of the filter layer. The new activated carbon should be cleaned before the first use, otherwise there is ink black water out. Activated carbon in the filter before the bottom and the top should be added 2 to 3 cm thick sponge, the role is to prevent algae and other large particles of impurities into the activated carbon to use 2 to 3 months, if the filter effect should be replaced The new activated carbon, sponge layer should also be replaced regularly.
Activated Carbon Filter The pressure vessel is a pressure vessel filled with a thick quartz sand cushion and a high quality activated carbon.
Feed water turbidity：＜10FTU，Product water turbidity：＜3FTU。
Operating temperature：5-60℃（Special temperature can be customized）；
feed water pressure：≥0.04MPa；
Backwashing feed water pressure：≥0.15 MPa；
Import and export pressure：0.1-0.15MPa。
Backwash method：Washed, or air - water combined with backwash;
Backwash water consumption：1-3%；
Backwashing strength：4-15L/s·m2 ；
Boiler and domestic water treatment
Groundwater in addition to iron, manganese removal
Purification of pool / landscape water
Desalination, reverse osmosis, electrodialysis pretreatment
Various industrial wastewater and water treatment
Treatment of water
Filtration product water
Product page other map (can be added after the site on-line)