Hangzhou Fuyang Jincanda Water Treatment Equipment Co., Ltd

High quality product, professional service, being the core supplier in laser industry!

PP PES PTFE Nylon 6 MHF-B Glass Fiber Hurricane Absolute Pleated Micro Filter Cartridge

Product Image: Product Details: DLM Series-PP Pleated Filter Cartridge The DLM Series PP Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal...

Send Inquiry
Product Details

Product Image:

图片1.png

Product Details:

DLM Series-PP Pleated Filter Cartridge

The DLM Series PP Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal of particles from 0.1 to 50µm. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process applications. These cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. DLM Series filter cartridges are available in a wide range of configurations to fit most commercially available filter housings.

Applications

■ Pharmaceutics

■ Food and beverage

■ Oil & Gas

■ Microelectronics

■ Chemical industry

■ Prefiltration for RO

■ Paints & Coatings

■ Cosmetics

■ Photographic solutions

■ Plating solutions

Features

■ Excellent chemical compatibility. Suitable for filtering organic solvents,acid bases

■ Pleated design increased the filtration area

■ low pressure drop, long service life

■ Full range of removal ratings

■ Graded pore density for high dirt holding capacity

■ FDA compliance material 

Specifications

■ Dimensions:  Outside diameter: 2.7” (69mm) Length: 9.75",10", 20", 30", 40"

■ Material of Constructions:Filter media: PP Support/Drainage: PP Cage/Core/End cap: PP Seal Material : Silicone, EPDM,  NBR, Viton, Teflon, E-FKM

■ Performance:Removal Rating: 0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, 50µm Maximum operating temperature: 80°C @1Bar, support adaptors are recommended for temperature exceeds 50°C Maximum operating differential pressure: 4.0Bar ,normal temperature Maximum operating differential pressure (reverse direction): 2.0Bar normal temperature Sterilization temperature time: 5times, 20 minutes cycles at 120°C

Pressure Drop vs.Flow Rate@20°C

图片2.png

Part Numbers/Ordering Information

图片3.png

End Cap Configuration

图片4.png

Product Image:

图片1.png

Product Details:

DLM Series-PP Pleated Absolute Filter Cartridge

The DLM Series PP Pleated Absolute Filter Cartridge is made of all polypropylene material, which have excellent performance of chemical compatibility. They are suitable for filtration of fluids in a wide range of critical applications. Multi-layer and new construction of media makes the filters have high efficiency with absolute ratings. The high surface area ensures long service life and low initial pressure drops. These cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. DLM Series filter cartridge are available in a wide range of configurations to fit most commercially available filter housings.

Applications

■ Pharmaceutics

■ Food and beverage

■ Oil & Gas

■ Microelectronics

■ Chemical industry

■ Prefiltration for RO

■ Paints & Coatings

■ Cosmetics

■ Photographic solutions

■ Plating solutions

Features

■ Pleated design increased the filtration area.

■ low pressure drop, long service life

■ Absolute ratings with high efficiency

■ Graded pore density for high dirt holding capacity

■ FDA compliance material

Specifications

■ Dimensions:  Outside diameter: 2.7” (69mm) Length: 9.75",10", 20", 30", 40"

■ Material of Constructions:Filter media: PP Support/Drainage: PP Cage/Core/End cap: PP Seal Material : Silicone, EPDM,  NBR, Viton, Teflon, E-FKM

■ Performance:Removal Rating: 0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, 50µm Maximum operating temperature: 80°C @1Bar, support adaptors are recommended for temperature exceeds 50°C Maximum operating differential pressure: 4.0Bar ,normal temperature Maximum operating differential pressure (reverse direction): 2.0Bar normal temperature Sterilization temperature time: 5times, 20 minutes cycles at 120°C

Pressure Drop vs.Flow Rate@20°C

图片8.png

Part Numbers/Ordering Information

图片9.png

End Cap Configuration

图片7.png

Product Image:

图片10.png

Product Details:

DLM Series-PES Pleated Filter Cartridge

The DLM Series-PES Pleated Filter Cartridge is constructed of imported polyethersulfone (PES)membrane media and nonwoven

support materials. The materials of cage, core and end caps are polypropylene. Adaptors are thermally welded with media without

using any glue or adhesives to prevent any possibility of pollution.

Applications

■ Pharmaceutics

■ Food and beverage

■ Chemical industry


Features

■ Excellent performance of chemical compatibility

■ Hydrophilic membrane with high flow

■ Non-fiber releasing according to pharmaceutics and food industry requirements

■ Experiencing 100% integrity tested

■ Flushed with ultrapure water

■ FDA compliance materia

Specifications

■ Dimensions:  Outside diameter: 2.7” (69mm) Length: 9.75",10", 20", 30", 40"

■ Material of Constructions:Filter media: PES Support/layer: PP Cage/Core/End cap: PP Seal Material : Silicone, EPDM, NBR, Viton, Teflon, E-FKM

■ Performance:Removal Rating:0.05µm,0.1µm, 0.22µm, 0.45µm,0.65µm,1.2µm, Maximum operating temperature: 80°C Maximum operating pressure:4.2Bar @25°C Maximum operating pressure (Reverse Direction): 2.1Bar @ 25°C Maximum temperature sterilization:20times, 30minutes cycles at 121°C

Pressure Drop vs.Flow Rate@20°C

图片11.png

Part Numbers/Ordering Information

图片12.png

End Cap Configuration

图片13.png

Product Image:

图片10.png

Product Details:

DLM Series-PTFE Pleated Filter Cartridge

The DLM Series-PTFE Pleated Filter Cartridge is constructed of imported natural hydrophobic Polytetrafluoroethylene membrane media and non-woven support materials. The adaptors are thermally welded without the use of glues or adhesives to prevent any possibility of pollution.

Applications

■ Fermentation tank

■ Vent filter of hold tank

■ Electronic industry

■ Chemical industry

■ Semiconductor: ultrapure gas filtration


Features

■ Excellent performance of high temperature-resistance, repeat steam ability in situation.

■ Hydrophobic membrane with high flow.

■ Low pressure drop, high flow rate, long service life

■ 100% integrity tested

■ Non fiber-releasing

■ FDA compliance material

Specifications

■ Dimensions:  Outside diameter: 2.7” (69mm) Length: 9.75",10", 20", 30", 40"

■ Material of Constructions:Filter media: PTFE Support/Drainage: PP Cage/Core/End cap: PP Seal Material : Silicone, EPDM,  NBR, Viton, Teflon, E-FKM

■ Removal Rating: For Gas:0.01µm, 0.02µm For Liquid: 0.1µm, 0.22µm, 0.45µm, 1µm

Maximum operating temperature: 80°C

Maximum operating pressure: 4.2bar @25°C

Maximum operating pressure(Reverse Direction): 2.0bar @25°C

Maximum temperature sterilization: 121°C every 30 minutes,30times

When filter the air, pressure is 2 bar ,start pressure 100Mbar ,10"filter can flow 300nm³/h

Pressure Drop vs.Flow Rate@20°C

图片14.png

Part Numbers/Ordering Information

图片15.png

End Cap Configuration

图片16.png

Product Image:

图片17.png

Product Details:

DLM Series-N6 Pleated Filter Cartridge

The DLM Series-N6 Pleated Filter Cartridge is constructed of Nylon6 media and nonwoven support materials. The adaptors are

thermally welded without the use of glues or adhesive to prevent any possibility of pollution.

Applications

■ Pharmaceutics

■ Food and beverage

■ Semiconductor


Features

■ Possessing better performance of high temperature-resistance,acid and base resistance

■ Hydrophillic membrane with high flow.

■ Non-fiber releasing according to pharmaceutics and food industry requirements

■ 100% integrity tested

■ Flushed with ultrapure water

Specifications

■ Dimensions:  Outside diameter: 2.7” (69mm) Length: 9.75",10", 20", 30", 40"

■ Material of Constructions:Filter media: Nylon6  Support/Drainage: PP Cage/Core/End cap: PP Seal Material : Silicone, EPDM,  NBR, Viton, Teflon, E-FKM

■ Performance:Removal Rating: 0.1µm, 0.22µm, 0.45µm, 0.65µm, 1µm, 3µm, 5µm

Maximum operating temperature: 60°C

Maximum operating differential pressure: 4.2Bar@ 25°C

Maximum differential pressure (reverse direction): 2.1Bar@ 25°C

Maximum temperature sterilization: 30times, 30minutes at 121°C

Pressure Drop vs.Flow Rate@20°C

图片18.png

Part Numbers/Ordering Information

图片19.png

End Cap Configuration

图片20.png

Product Image:

图片21.png

Product Details:

SCC Series Pleated Filter Cartridge-PP

SCC Series Pleated filter cartridges are designed with a single piece outer cage which increases the intensity of the filter cartridges. They deliver high efficiency and consistent filtration of fluids in a wide range of critical applications and are Constructed out of pleated melt blown filter media that provides removal of particles from 0.1 to 50µm. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process application. SCC Series cartridges are available in a while range of configurations to fit most commercially available filter housings.

Applications

■ Pharmaceutics

■ Food and beverage

■ Oil industry

■ Semiconductor

■ Chemical industry

■ Prefiltration for RO

■ Paints & Coatings

■ Cosmetics

■ Photographic solutions

■ Plating solutions

Features

■ Single-piece cage and core construction

■ Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases

■ Pleated design increased the filtration area

■ Low pressure drop, long service life

■ Full range of removal ratings

■ Graded pore density for high dirt holding capacity

■ FDA compliance material

Specifications

■ Dimensions:  Outside diameter: 2.7” (69mm) Length: 9.75",10", 20", 30", 40"

■ Material of Constructions:Filter media: PP Support/Drainage: PP Cage/Core/End cap: PP Seal Material : Silicone, EPDM,  NBR, Viton, Teflon, E-FKM

■ Performance:Removal Rating: 0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, 50µm Maximum operating temperature: 80°C @1Bar, support adaptors are recommended for temperature exceeds 50°C Maximum operating differential pressure: 4.0Bar ,normal temperature Maximum operating differential pressure (reverse direction): 2.0Bar normal temperature Sterilization temperature time: 5times, 20 minutes cycles at 120°C

Pressure Drop vs.Flow Rate@20°C


图片22.png

Part Numbers/Ordering Information

图片23.png

End Cap Configuration

图片24.png

Product Image:

图片25.png

Product Details:

SCC Series Pleated Filter Cartridge-Glass Fiber

SCC Series Glass Fiber Pleated filter cartridges deliver high efficiency and consistent filtration of fluids in a wide range of critical applications. The Single-Piece outer cage design increased intensity. They are constructed of pleated Borosilicate fibergalss filter media that provides removal of particles from 0.45 to 20µm. The high surface area ensures long service life and low initial pressure drops. All the cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. Series cartridges are available in a while range of configurations to fit most commercially available filter housings.

Applications

■ Pharmaceutics

■ Food and beverage

■ Oil industry

■ Chemical industry

■ Cosmetics

■ DI water systems

■ Air and Gas filtration


Features

■ Single-piece cage and core construction

■ Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases

■ Pleated design increased the filtration area

■ Low pressure drop, long service life

■ Full range of removal ratings

■ Graded pore density for high dirt holding capacity

Specifications

■ Dimensions:  Outside diameter: 2.7” (69mm) Length: 9.75",10", 20", 30", 40"

■ Material of Constructions:Filter media: Birosilicate fiberglass with acrylic binder Support/Drainage: PP Cage/Core/End cap: PP Seal Material : Silicone, EPDM,  NBR, Viton, Teflon, E-FKM

■ Performance:Removal Rating: Removal Rating: 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, absolute-ß5000(99.98% efficiency) 

Maximum operating temperature: 110°C @1Bar, support adaptors are recommended for temperature exceeds 80°C

Maximum operating differential pressure: 5.0Bar ,normal temperature

Maximum operating differential pressure (reverse direction): 2.0Bar normal temperature

Pressure Drop vs.Flow Rate@20°C

图片26.png

Part Numbers/Ordering Information

图片27.png

End Cap Configuration

图片28.png

Product Image:

图片29.png

Product Details:

DLQF Series Filter Cartridge

DLQF Series Filter Cartridge is a new product developed by Darlly Filtration Equipment Co.,Ltd in Hangzhou China based on new market requirements. Its target market is 4G to 8G LCD processing, and can be used to similar applications. The large diameter creates a larger surface filter area that reduces the number of filter cartridges required with a long service life and high flow rate result in low investment and less manpower costs. The cartridge has three end configurations:83mm diameter 222 double O-ring,83mm diameter 226 double O-ring,131mm diameter 334 single O-ring to make it applicable for many fields. There are five types of filter media: Polypropylene Pleated, Polypropylene Melt blown, PES membrane, PTFE membrane, Hydrophilic PTFE membrane.

Ø83-226 Pressure Drop vs.Flow Rate@20°C

图片30.png

Ø131-334 Pressure Drop vs.Flow Rate@20°C

图片31.png

Dimension Drawing

图片32.png

Specifications  

■ Dimensions:  Outside diameter: 83mm、131mm Length: 10 inch(251mm), about 260mm including O-ring adaptor

■ Material of Constructions:Filter media: Pleated depth Polypropylene (PP), or Melt blown PP;Hydrophilic PES membrane;

Support/Drainage: Polypropylene (PP)

PTFE membrane; Hydrophilic PTFE membrane

End caps : Glass Polypropylene (PP)

O-ring seal :EPDM, FEP encapsulated Viton, Silicone

■ Performance:PP: 0.1µm, 0.22µm, 0.45µm,1µm, 1.2µm ,3µm, 5µm, 10µm,20µm,50µm

PES: 0.05µm, 0.1µm, 0.22µm, 0.45µm, 0.65µm, 1.2µm

PTFE: 0.22µm, 0.5µm, 1µm, 3µm, 10µm

Hydrophilic PTFE: 0.5µm, 1µm, 3µm, 10µm

Maximum Operating Temperature: Melt Blown PP: 65°C; Others: 80°C

Maximum Differential Pressure: Melt Blown:1.03Bar at 65°C; Others: 4.0Bar, at 20°C; 3.0Bar at 65°C

Recommended Change out Differential Pressure:2.4Bar at 20°C

Part Numbers/Ordering Information 

图片33.png

Product Image:

图片34.png

Product Details:

MHF-B Series Filter Cartridge

MHF-B series filter cartridge is a new product developed by Hangzhou Darlly Filtration Equipment Co.,Ltd to meet the market

requirements.We adopt revolutionary horizontal pleat technology and use specialized machinery equipment to produce

standardized products efficiently.This reduces the lead time of production and makes the products be in competitive price.Single cartridge has very big filtration area and high flowrate. The cartridge is designed to be used in different filter housings which contains 1 to 37 filter cartridges.It can be used for a variety of hardwares and for different flowrate request.

Applications

■ Acids and bases

■ Amines

■ Beer and wine

■ Bottled water

■ Carbon beds

■ Completion fluids

■ Deep wells

■ Desalination

■ DI resins

■ Edible oils

■ EDM fluids

■ Fructose

■ Glycol

■ Groundwater clean-up

■ Laundry water

■ Liquor

■ Machine coolants

■ Magnetic media

■ Makeup water

■ Organic solvents

■ Photo chemicals

■ Plating solutions

■ RO membranes

■ Storm water

■ UF membranes

■ Ultrapure water

■ Wastewater

■ Waterflood

■ Workover fluids


Features

■ High loading capacity for long life and lower cost filtration

■ Fewer cartridges for fewer change-outs, thus less labor cost

■ O-ring design cause no bypass to ensure the filtration efficiency

■ Easy handing result in less manpower

■ Wide chemical compatability for different applications

Specifications

■ Dimensions:  Outside diameter: 6.5 inch(165mm)

Inside Diameter:1.6 inch(40mm)

Length: 39 inch(1000mm),60 inch

■ Material of Constructions:Filter media: Polypropylene 

Support/Drainage: Polypropylene

End Cap Material: Glass Fiber reinforced PP

Seal Material :EPDM, FEP encapsulated Viton,NBR

■ Performance:Removal Rating: Removal Rating: 1µm, 3µm, 5µm, 10µm, 20µm, 50µm, 70µm,

Maximum Operating Temperature: 80°C

Maximum Differential Pressure: 3.4Bar, 80°C

Recommended Change out Differential Pressure:2.4Bar at 20°C

Suggested Maximum flow rate: 800LPM

Part Numbers/Ordering Information

图片35.png


If the pp pes ptfe nylon 6 mhf-b glass fiber hurricane absolute pleated micro filter cartridge caters to your requirement, welcome to contact our factory for more details. As one of the leading and experienced manufacturers and suppliers in China, we are always at your service.

Related Products
Inquiry