Duplex Bag Filter Housing
INTRODUCTION Qic-lock flange: excellent effect on bypass leakage and easy for installation - ASTM SS304 or SS316 stainless steel iron construction for best chemical compatibility and corrosion resistance. - Two styles of surface finish (both inside and outside): electro-polish or Bead blasted -...
These duplex bag filter housings offer a wide range of flow capacities and contaminant-holding capabilities. From 2 - 24 nos.
When ordered as a filter, it's fitted with perforated stainless steel baskets designed to hold disposable or cleanable filter bags. Industry-standard size bags are used: the standard 30 inch baskets accept bag size 2, the optional 15 inch baskets take size 1.
The standard pressure rating for all models is 150 psi.
· Multiple housing styles available (standard, quick access, low profile, hinged)
· Permanently piped housings are opened without tools and without disturbing the piping
· Machined cover gasket groove provides positive O-ring sealing
· Carbon steel, 304 or 316 stainless steel construction housings
· Large-area, 30 inch deep, heavy-duty, 9/64 inch perforated baskets
· Easy to clean
· Low pressure drop
· Seal materials: EPDM, Viton
· Pressure rating 150 psi
· Flanged connections for 2 through 12 inch pipe: ANSI,JIS,DIN,GB
· Vent, drain and gauge thread connections: NPT, BSP
l Cooling Tower Water
l Biodiesel Production
l Coolant Filtration
l Remediation Sites
l Solvents, Paints
l Edible Oils
l Waste Water
l Food and Beverage
l Process Water
l Plating Solutions
l Industrial Waste Water Treatment
l Hydraulic Fluids
l Cutting Fluids
l Ground Water Remediation
Qic-lock flange: excellent effect on bypass leakage and easy for installation
- ASTM SS304 or SS316 stainless steel iron construction for best chemical compatibility and corrosion resistance.
- Two styles of surface finish (both inside and outside): electro-polish or Bead blasted
- Patent design to prevent bypass leakage.
- Multi choice of seal material to meet different needs: Silicon rubber, EPDM rubber, Viton rubber;
- For filter bag size 02 (7” dia X 32” long)
- 150 PSI (1.0Mpa) pressure available
- Standardised flanges and threads: DIN, BSP, ANSI
- Custom designs available.
Accessories included: air release valve, pressure gauge and two 5 micron bag filters
Packaging: wooden case
3 - 4 “
3 - 4“
3 - 5“
If the parallel stainless steel 304 316l 7x32 size 2# 150 psi 10 bar quick opening flange closure clamp closure multi bag filter housing caters to your requirement, welcome to contact our factory for more details. As one of the leading and experienced manufacturers and suppliers in China, we are always at your service.